Page 1
HODEDAH Assembly Instructions 2 people This instruction booklet contains important safety information, please read and keep for future reference. 70 mins ITEM # HIK 76 1 YR LTD Kitchen Stand Cabinet (Low) 1 Box REAR VIEW FRONT VIEW Product Dimensions : Height 53.9'' x Width 23.6'' x Depth 15.7'' 1 | Page www.Hodedah.com...
Page 2
WARRANTY Hodedah warrants this product to be free from defect in materials and workmanship and agrees to remedy and such defect. This warranty covers one year from the date of original purchase. This is solely limited to replacement of defective parts and no assembly for labor is included.
HODEDAH Let's get started... Helpful hints, read before beginning assembly Make sure you receive all boxes. if your item is packed in one box, box count will read 1 of 1, likewise if your item is packed in two boxes, box count will read 1 of 2 and second box will read 2 of 2.
HODEDAH Step 3 CB SCREW M4X22MM CB SCREW M3.5X12MM MOON HANDLE (PVC) MAGNET PLATE (1 HOLE) BACK VIEW FRONT VIEW LEFT VIEW RIGHT VIEW 1. Tighten Handle (F1) onto door panel (18 & 19) with CB Screw M4x22mm (F2) using screwdriver.
Page 11
HODEDAH Step 4 CB SCREW M3.5X16MM 3.5KG MAGNET DRAWER SLIDE 14" BOTTOM VIEW LEFT VIEW RIGHT VIEW 1. Place the Drawer Slide (L1) onto 3 holes area as shown at right view panel (2). Then tighten it with 3 x CB Screw M3.5x16mm (C).
Page 12
HODEDAH Step 5 CB SCREW M4X38MM NAIL 5/8 CB SCREW M3.5X16MM MOON HANDLE (PVC) DRAWER SLIDE 14" BOTTOM VIEW BOTTOM VIEW BOTTOM VIEW COMPLETED 1. At bottom view position, place 2x panel (15) next to each side of panel (14 & 16).
HODEDAH Step 6 MINIFIX NUT MINIFIX CAP ALLEN KEY BOTTOM VIEW BOTTOM VIEW 1. At bottom view position, fix 2x panel (2) to panel (1 & 10) with 4x Minifix Nut (B2) using Allen Key (K). After that, insert 4x cap (B3).
Page 14
HODEDAH Step 7 CSK CAP WOOD M6X50MM MINIFIX CAP ALLEN KEY BOTTOM VIEW 1. At bottom view position, fix side panel (5) to panel (10,11 & 12) with 5x Screw (E) using Allen Key (K). After that, insert 5x cap (B3).
Page 15
HODEDAH Step 8 CSK CAP WOOD M6X50MM MINIFIX CAP ALLEN KEY BOTTOM VIEW 1. Fix panel (13) to panel (5 & 6) by using Dowels (A) onto non-thru holes at panel (5 & 6) and tighten 5x Screw (E) from the thru-holes of panel (6) with Allen Key (K) to panel (10,11 &...
Page 16
HODEDAH Step 9 PVC NAIL WITH PIN 5/8 1. Fix 4x PVC Nail (P) on bottom of side panel (5 & 6) with 2x PVC Nail (P) on each side panel (5 & 6). 16 | Page www.Hodedah.com...
Page 17
HODEDAH Part 1 17 | Page www.Hodedah.com...
Page 18
HODEDAH Step 10 CSK CAP WOOD M6X50MM MINIFIX CAP ALLEN KEY BOTTOM VIEW 1. At bottom view position, fix panel (3) to panel (1) with 2x Screw (E) using Allen Key (K). After that, insert 2x cap (B3). 18 | Page...
Page 19
HODEDAH Step 11 CSK CAP WOOD M6X50MM MINIFIX CAP ALLEN KEY BOTTOM VIEW 1. Fix panel (4) to panel (1) with 2x Screw (E) using Allen Key (K). After that, insert 2x cap (B3). 19 | Page www.Hodedah.com...
Page 20
HODEDAH Part 2 20 | Page www.Hodedah.com...
Page 21
HODEDAH Step 12 MINIFIX NUT MINIFIX CAP ALLEN KEY 1. Fix panel (3 & 4) to panel (5 & 6) by inserting 4x Minifix Nut (B2) into panel (3 & 4) 's thru holes with Allen Key (K) to tighten it. After that insert 4 x cap (B3).
HODEDAH Step 13 NAIL 5/8 REAR VIEW - At rear view position, place 2x back panel (7) on top back of the main unit, while 2x back panel (8) on bottom back of the main unit and align it properly for nailing.
Page 23
HODEDAH Step 14 CB SCREW M3.5X16MM SHELF SUPPORT MT STOPPER SLOT IN DOOR PANEL 1. Insert 4x Shelf Support (J) into the holes on panel (3 & 4). 2. Insert 2x MT Stopper (H) into the holes at panel (11) bottom side.
Page 24
HODEDAH Step 15 Final step... 1. Take panel (9) and slide in on top side of 4x Shelf Support (J) (As Shown). 2. Then slide in the drawer (14) by slotting the rollers at each end of drawer slide (L2) onto the rail of drawer slide (L1) fixed at side panel (5 &...
Page 25
HODEDAH Job Complete... Enjoy & Thank you for purchasing from Hodedah! 25 | Page www.Hodedah.com...
Page 26
Failure to detach this restraint before moving furniture may result in injury and damage. If the safety kit is not in the box, please contact our consumer service team at Tel. 1 (718) 456 0505 or Email Support@Hodedah.com in order to obtain one before using the furniture.
Page 27
HODEDAH FITTING OF ANTI-TIP SAFETY STRAP STEP 1: Attach the mounting bracket to the furniture in the solid part below the top panel a few inches away from the side of the unit. Screw through the smallest hole of STEP 2:...