Table of Contents
Advertisement
Spider
EN
Feeding computer - Voercomputer - Fütterungscomputer - Logiciel d'alimentation
7.6 User tips
Individually or on a group curve
You can opt for individual feeding or feeding per group curve. These
options can be found on the animal card. The group curve is adjustable
via groups. The curve of the selected group is always used. Individual
set-up and breakdown can also be used for individual feeding.
Furthermore, the feed dose per animal can easily be changed via
'Animals'
'Feed doses'.
->
Group entry
If you want to change the same things for several animals, you can do
so via group entry.
Multiple animals can be selected simultaneously, making it easy to carry
out changes for entire groups.
= Selecting (without clicking)
= Deselecting/removing from selection (without clicking)
Select a number of animals, then click on 'Group input' to perform the
desired action.
Parlour monitor - Live monitor
The animals that have been recognized can be seen via 'Overviews'
'Live monitor' or 'Parlour monitor'.
->
E-mails
System notifications can also be sent by e-mail if the Spider is connected to the internet. This can be set via
'System'
'E-mails'.
->
Control gates and motors
Motors can be tested, and the gates of the feed box can be opened and closed via 'System'
'Control gates and
->
motors'. The possibility to set a closing time is a handy feature. That way, e.g. a closing gate can be closed for 60
minutes during milking and will then open again automatically after the set time.
Silo management
An additional option is to apply silo management. This can be set via 'System'
'Silo and feed types'. The dash-
->
board shows the filling level of the silo. A message will appear on the dashboard once the set minimum level has
been reached.
Index
32 - 46
Hanskamp AgroTech B.V. (The Netherlands)
www.hanskamp.nl/en
Advertisement
Table of Contents
