Table of Contents
Advertisement
EN
Feeding computer - Voercomputer - Fütterungscomputer - Logiciel d'alimentation
3.3.2 Examples of installation in the milking parlour
15
Figure 15: Leg recognition
To determine the position of the Antenna, consider the position of the animal and where the transponder will be situated.
Ensure that the animal's transponder is within the boundaries of the Antenna.
Figure 16-17: Ear recognition
Use the mounting kit (art. no. 007-535-000) for installation on the
MultiFrame (40° - 50° & 60° - 70°). Because the animals all have their
ear transponders on the same side, the Antenna must be installed on the
opposite wall of the milking parlour. The cable can be run through the side
by breaking off the tab on the Antenna (fig. 19).
Figure 18: Neck recognition
A mounting bracket (art. no. 007-525-000) is available for installing neck
recognition.
Index
Hanskamp AgroTech B.V. (The Netherlands)
16.1
www.hanskamp.nl/en
16.2
17
15-25cm
20 - 46
Spider
18
19
Advertisement
Table of Contents
