Table of Contents
Advertisement
EN
Feeding computer - Voercomputer - Fütterungscomputer - Logiciel d'alimentation
3.
Installation Hardware
General comment:
The Spider is Hanskamp's feeding computer for automatically dispensing concentrate to
individual animals in the milking parlour or feeding station. It is great for any dairy farmer
interested in automated and economical feeding, regardless of company size. One of the
Spider's perks is that, in most cases, it will work with transponders you already have. The
Spider's user interface has been designed in a logical way, making it easy to control Spider
from your PC, smartphone, or tablet. The SpiderServer establishes its own wifi network,
providing access to the built-in web server and allowing you to quickly and easily adjust
concentrate portions for individual animals or groups, and monitor problem animals.
This instruction will help you to install the Spider. Read this instruction carefully and
follow the safety instructions.
Examples of installation can be found at www.hanskamp.nl/en.
The order numbers and names of accessories can be found in attachments 13.1 (SpiderServer)
and 13.2 (SpiderClient).
Transport and storage:
Spider will be shipped in a sealed box. The box is completely sealed with tape and lined
with protective foil on the inside to prevent damage. The Spider shall also be stored in
this way. See fig. 1 for supply specifications.
Please note! Always move the box carefully!
Please note! When opening the packaging, parts may fall out.
Make sure the packaging is always facing up upon opening!
Please note! When opening the packaging beware of damage and loose
and protruding parts that could cause injury!
Safety stickers:
The user and installer are solely responsible for the safe operation and maintenance of the
Spider. Safety stickers are used to ensure safety in and around the Spider. These stickers must
be placed correctly. There is one safety sticker applicable to Spider (see fig. 2). This sticker
must be placed on the right or left side of the unit.
Applying the stickers:
•
Make sure the surface is dry and clean.
•
Make sure the surface temperature is at least 5°C.
•
Find the right position for the sticker.
•
Remove a small part of the foil on the back.
•
Place the sticker on the surface and press a small part of
the self-adhesive layer onto the surface.
•
Carefully remove the foil and press down the rest of the
sticker.
•
Remove any air bubbles with a needle and use the foil to
smoothen the sticker.
Index
Hanskamp AgroTech B.V. (The Netherlands)
Product
name
Manufacturer
Figure 2: Product specifications
10 - 46
www.hanskamp.nl/en
Spider
The box contains:
1. SpiderServer
005-100-000
2. PowerUnit
002-812-000
3. X number of Antennas
005-150-000
Optional:
4. SpiderClient
005-115-000
Figure 1: Supply specifications
Type description;
can be found on the side of the enclosure
Product
specifications
CE
marking
Advertisement
Table of Contents
