Assembly Examples Spider On Feedstation Walk-In - Hanskamp Spider Installation And Operating Instructions Manual

Feeding computer
Table of Contents

Advertisement

EN
Feeding computer - Voercomputer - Fütterungscomputer - Logiciel d'alimentation

3.2.2 Assembly examples Spider on FeedStation Walk-In

9
Figure 9:
Neck recognition: can be mounted directly to the feed trough.
Figure 10: Leg recognition: ensure that the EWA Antenna Transformer unit
(art. no. 005-175-000) is located under the feed trough mounting plate and
that the Antenna cannot come into contact with the feed trough.
Figure 11: Ear recognition: use the mounting plate (art. no. 004-246-000) to install the
Antenna for ear recognition. Place the Antenna on the same side as the
PipeFeeder.
Caution! Run the Antenna cable through the tubes carefully to prevent
damage to the cable.
Index
Hanskamp AgroTech B.V. (The Netherlands)
10
15 - 46
www.hanskamp.nl/en
11
±10cm
10a
11a
Spider
9a

Advertisement

Table of Contents
loading

Table of Contents