Carrier PrimeLINE Operation And Service Manual page 17

Do not remove wire harnesses from module unless you are grounded to the unit frame with a
static safe wrist strap.
Unplug all module connectors before performing arc welding on any part of the container.
The unit must be OFF whenever a programming device is inserted or removed from the control-
ler programming port.
Use care when cutting wire ties to avoid nicking or cutting wires.
Do not allow moisture to enter wire splice area as this may affect sensor resistance.
CAUTION
!
CAUTION
!
CAUTION
!
CAUTION
!
CAUTION
!
1–5 T-362