Figure 7.21 Removing Front Access Panels; Figure 7.22 Removing Evaporator Motor; Figure 7.23 Return Sensors - Bracket - Carrier PrimeLINE Operation And Service Manual

Figure 7.21 Removing Front Access Panels

2. On the right side, disconnect the fan motor wiring, loosen the fastener and remove (slide) the evaporator
motor from the unit (see Figure 7.22).

Figure 7.22 Removing Evaporator Motor

3. Loosen the fastener on the sensor bracket (see Figure 7.23).

Figure 7.23 Return Sensors - Bracket

7–45 T-362