Operating Mode Description
Operation mode
Standby mode
Note:
*Standby mode: The inverter
is not turned on yet but at this
time, the inverter can charge
battery without AC output.
Fault mode
Note:
*Fault mode: Errors are
caused by inside circuit error
or external reasons such as
over temperature, output short
circuited and so on.
Line Mode
Description
No output is supplied by the
unit but it still can charge
batteries.
PV energy and utility can
charge batteries.
The unit will provide output
power from the mains. It will
also charge the battery at
line mode.
The unit will provide output
power from the mains. It will
also charge the battery at
line mode.
LCD display
Charging by utility and PV energy.
Charging by utility.
Charging by PV energy.
No charging.
Charging by utility and PV energy.
Charging by utility.
Charging by PV energy.
No charging.
Charging by utility and PV energy.
Charging by utility.
If "solar first" is selected as output source
priority and solar energy is not sufficient to
provide the load, solar energy and the utility will
provide the loads and charge the battery at the
same time.
22