Table of Contents
Advertisement
OPERATION
Power ON/OFF
Once the unit has been properly installed and the batteries are connected well, simply press On/Off switch
(located on the side of the inverter) to turn on the unit.
Operation and Display Panel
The operation and the LCD module, shown in the chart below, includes four touchable buttons with status
indication and a LCD display, indicating the operating status and input/output power information.
Touchable buttons with indication
Function Key
LED Indicator
Description
To exit setting mode
To go to previous selection
To go to next selection
To confirm the selection in setting mode or enter setting mode
Color
Solid/Flashing
Solid On
Green
Alternatively
Green/Yellow
flashing
Yellow
Solid On
Solid On
Red
LCD display
Touchable operation buttons with status
indication. Buttons will light up different color to
display operation status.
Unit is working normally (without any
warning or fault codes and charging).
Battery is charging.
Warning code appears.
Fault mode.
11
Messages
Advertisement
Table of Contents
