Operating Mode Description - MPP Solar LV2424 User Manual

Main board firmware version
SCC firmware version

Operating Mode Description

Operating mode
Standby mode
Note:
*Standby mode: The inverter
is not turned on yet but at
this time, the inverter can
charge battery without AC
output.
*Power saving mode: If
enabled, the output of
inverter will be off when
connected load is pretty low
or not detected.
Version 00001.00
Version 00002.00
Behaviors
No output power, solar
or utility charger
available
LCD display
Battery is charged by utility.
Battery is charged by PV energy.
Battery is charged by utility and PV energy.
Battery is charged by PV energy and feed PV energy to
grid.
No charging.
24