Pcl - Ricoh P C200W User Manual

Use printer menus
Menu item
Image Smoothing
On
Off*
Wait Timeout
Disabled
Enabled*
Wait Timeout Time
15–65535 (40*)
Note: An asterisk (*) next to a value indicates the factory default setting.

PCL

Menu item
Font Name
[List of available fonts] (Courier*)
Symbol Set
[List of available symbol set] (10U
PC-8*)
Pitch
0.08–100 (10*)
Orientation
Portrait*
Landscape
Reverse Portrait
Reverse Landscape
Lines per Page
1–255
PCL5 Minimum Line Width
1–30 (2*)
Description
Enhance the contrast and sharpness of low-resolution images.
Note: This setting has no effect on images with a resolution of 300 dpi or
higher.
Enable the printer to wait for more data before canceling a print job.
Set the time in seconds for the printer to wait for more data before canceling a
print job.
Note: This menu item appears only when Wait Timeout is enabled.
Description
Select a font from the specified font source.
Specify the symbol set for each font name.
Note: A symbol set is a set of alphabetic and numeric characters, punctuation,
and special symbols. Symbol sets support the different languages or
specific programs such as math symbols for scientific text.
Specify the pitch for fixed or monospaced fonts.
Note: Pitch refers to the number of fixed-space characters in a horizontal inch of
type.
Specify the orientation of text and graphics on the page.
Specify the number of lines of text for each page printed through the PCL
datastream.
Notes:
This menu item activates vertical escapement that causes the selected
•
number of requested lines to print between the default margins of the page.
60 is the U.S. factory default setting. 64 is the international factory default
•
setting.
Set the initial minimum stroke width.
Note: Jobs printed in 4800 CQ use half the value.
52