Postscript - Ricoh P C200W User Manual

Use printer menus
Advanced Imaging
Menu item
Color Balance
Cyan
-5 to 5 (0*)
Magenta
-5 to 5 (0*)
Yellow
-5 to 5 (0*)
Black
-5 to 5 (0*)
Reset Defaults
Color Correction
Color Correction
Auto*
Off
Manual
Color Correction Content
Color Adjust
Note: An asterisk (*) next to a value indicates the factory default setting.

PostScript

Menu item
Print PS Error
On
Off*
Minimum Line Width
1–30 (2*)
Lock PS Startup Mode
On*
Off
Description
Adjust the amount of toner that is used for each color.
Modify the color settings used to print documents.
Notes:
• Off sets the printer to receive the color correction from the software.
• Auto sets the printer to apply different color profiles to each object on the printed
page.
• Manual allows the customization of the RGB or CMYK color conversions applied to
each object on the printed page.
Color Correction Content is available only when Color Correction is set to Manual.
•
Calibrate the printer to adjust color variations in the printed output.
Description
Print a page that describes the PostScript error.
Note: When an error occurs, processing of the job stops, the printer prints an
error message, and the rest of the print job is flushed.
Set the minimum stroke width.
Note: Jobs printed in 4800 CQ use half the value.
Disable the SysStart file.
Note: The default setting varies depending on the printer model.
51