Ricoh P C200W User Manual page 75

Use printer menus
Menu item
Default Print Permission Login
Security Reset Jumper
Enable "Guest" access*
No Effect
Minimum Password Length
0–32
Enable Password/PIN Reveal
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Shows the default permission used for the user to print.
Note: This setting shows only when one or more Login Methods are created.
Specify user access to the printer.
Notes:
The jumper is located beside a lock icon on the controller board.
•
Enable "Guest" access gives anyone access to all aspects of the printer.
•
• No Effect may make access to the printer impossible when the required security
information is unavailable.
Specify the password length.
Show the password or personal identification number.
Note: This menu item is available only in some printer models.
75