Ricoh P C200W User Manual page 45

Use printer menus
Menu item
Printer Emulations
Emulator Security
Disable Printer Message Access
On*
Off
Print Configuration
Black Only Mode
Off*
On
Print Configuration
Color Trapping
Off
1
2*
3
4
5
Print Configuration
Font Sharpening
0–150 (24*)
Device Operations
Quiet Mode
Off*
On
Device Operations
Panel Menus
Enable*
Disable
Device Operations
Clear Custom Status
Device Operations
Clear all remotely-installed messages
Description
Disable access to printer message during emulation.
Print color content in grayscale.
Enhance the printed output to compensate for misregistration in
the printer.
Set a text point-size value below which the high-frequency screens
are used when printing font data.
For example, if the value is 24, then all fonts sized 24 points or
less use the high-frequency screens.
Set the printer to operate in Quiet Mode.
Note: Enabling this setting slows down the printer performance.
Enable access to the control panel menus.
Erase user-defined strings for the Default or Alternate custom
messages.
Erase messages that were remotely installed.
Note: This menu item is available only in some printer models.
45