Image - Ricoh P C200W User Manual

Use printer menus
Menu item
PCLXL Minimum Line Width
1–30 (2*)
A4 Width
198 mm*
203 mm
Auto CR after LF
Off*
On
Auto LF after CR
Off*
On
Print Timeout
Disabled
Enabled* [90]
Print Timeout Time
1–255 (90*)
Note: An asterisk (*) next to a value indicates the factory default setting.

Image

Menu item
Auto Fit
On
Off*
Invert
Off*
On
Scaling
Anchor Top Left
Best Fit*
Anchor Center
Fit Height/Width
Fit Height
Fit Width
Description
Set the width of the logical page on A4-size paper.
Note: Logical page is the space on the physical page where data is printed.
Set the printer to perform a carriage return after a line feed control command.
Note: Carriage return is a mechanism that commands the printer to move the
position of the cursor to the first position on the same line.
Set the printer to perform a line feed after a carriage return control command.
Set the printer to end a print job after it has been idle for the specified amount of
time in seconds.
Note: Print Timeout Time appears only in some printer models.
Description
Select the best available paper size and orientation setting for an image.
Note: When set to On, this menu item overrides the scaling and orientation settings
for the image.
Invert bitonal monochrome images.
Note: This menu item does not apply to GIF or JPEG image formats.
Adjust the image to fit the printable area.
Note: When Auto Fit is set to On, Scaling is automatically set to Best Fit.
53