View System Statuses Menu - Simplex TFX-500M Operator's Manual

Note: The last line of the display shows the absolute system address of the source of the
event.
When either the beginning OR end of the log is reached, an End of Log! message will be displayed, and the internal
buzzer will beep twice. Press QUIT to exit the function.
Newest Event First ------ Contents of the Event Log will be displayed in the reverse order
S
of occurrence (reverse- chronological), with newest first. Press
through the log. Press
OR end of the log is reached, an End of Log! message will be displayed, and the internal
buzzer will beep twice. Press QUIT to exit the function.
Highest Priority Event First ------ The contents of the Event Log will be displayed in order
S
of priority, the highest priority first. Press
to move backward through the log. When either the beginning OR end of the log is
reached, an End of Log! message will be displayed, and the internal buzzer will beep
twice. Press QUIT to exit the function.
Event Priority:
1. FIRE (EVACUATE)
2. FIRE (ALERT)
3. WARNINGS
4. FAULTS (SYSTEM)
5. SUPERVISORY EVENTS

3.4. View System Statuses Menu

Select " View System Statuses"option from the Main Menu. This selection allows you to choose various system statuses.
These are (1) Zone Alarm Status (2) Zone Trouble Status (3) Zone Isolation Status (4) Common Alarm Status (5) Common
Fault Status (6) Common Disabled Status The sequence of options shown in Figure 3--4 will be displayed.
View Zones Alarm Status ------ The Alarm/Clear status of each zone may be viewed. A " 1"indicates that a zone IS in alarm,
a " 0"indicates that it is not. Thus, for the example given below, zones 2 and 13 are in alarm. Pressing QUIT moves to the
Zone Trouble Status menu option. The Zone Alarm Status display is in the following format:
Zones Alarm St.
Do you want to
view the log?
s
Newest
event first?
N or
s
Oldest
event first?
N or
s
Highest priority
event first?
N or
View system
statuses?
Figure 3--3 View Log menu options sequence.
to move backward through the log. When either the beginning
s
to move forward through the log. Press
t
6. FAULTS (ADDRESSABLE POINTS)
7. FAULTS (CLEAR)
8. RESET/SILENCE
9. PRINTER OFF LINE
21
firealarmresources.com
Y
Y
Log Display
t
Y
Log Display
t
Y
Log Display
t
Y
Next Menu
to move forward
t
s