Simplex TFX-500M Operator's Manual page 40

4. For addressable points, the information logged is as follows: event message, location, time and date,
point description, zone number, loop number, point number. For non-addressable points, the informa-
tion logged is as follows: event message, zone number, time and date, location, point type/number.
The MAXIMUM number of events that the log can hold is 150. Asking for more than this number will
cause the AUTOCALL TFX-500M/800M control panel to display: invalid,try again
5. The printout will only contain events appropriate to the access level of the user. If there are fewer
events in the log than the number requested, the AUTOCALL TFX-500M/800M control panel will
print the entire log. Events followed by the letter " R"have been recycled following an event log over-
flow.
AUTOCALL TFX Fire Control System Operator' s Manual
32
firealarmresources.com