Download Print this page

Kinderkraft JUNIOR FIX Manual page 27

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 24
• Grab the booster seat with both hands and slide both tethers into the anchors of the car
seat.
• After both ISOFIX tethers "click", push the booster seat to the car seat backrest applying
even and strong pressure on both sides.
• ATTENTION! The tethers are is proper place only when both button markers are completely
green.
• Grab the booster seat and check if it is not loose. If it moves and the ISOFIX tethers come
out, repeat the steps presented above.
• Buckle the child in with the car seatbelt. For details, please see the part covering the booster
seat installation for weight groups II and III (point 5.1).
5.3 Removing the booster seat (ISOFIX)
• Press the ISOFIX release button (I) on both ISOFIX arms (H). The tethers will be released and
the marker colour will change to red. Reinsert the ISOFIX arms into the seat base – you may
hear a rattling sound as you move the arms back.
6.1 Installing/removing the cover
• Disconnect the booster seat base and backrest (see point 4.3).
• Unfasten the cover. The fasteners are on the edges. You can now remove the cover from
the booster seat.
Cover installation:
• Connect the booster seat base and backrest (see point 4.3).
• Put the cover on the booster seat.
• Fasten the cover.
6.2 Cleaning
Use only the genuine cover, which constitutes an important element of the booster seat's
safety.
ATTENTION: Never use the booster seat without the cover.
• You can remove the cover and machine wash it in mild detergent at a low setting (30°C).
Always obey the washing directions on the cover's tag. Washing in temperature exceeding
30°C may cause the colours to fade. The cover should not be spin-dried or dried in a drum
dryer (which may lead to the material delaminating).
• You can clean plastic elements with soapy water. Do not use aggressive cleaning agents (like
solvents).
7. Guarantee
1.
All Kinderkraft products are covered by a 24-month warranty. The warranty period
starts from the date the product is handed over to the Buyer.
2.
The warranty is only valid in the member states of the European Union, excluding
overseas territories (as currently defined, including in particular: Azores, Madeira,
Canary Islands, French Overseas Departments, Åland Islands, Athos, Ceuta, Melilla,
Helgoland, Büsingen am Hochrhein, Campione d'Italia and Livigno) and the territory
27

Advertisement

loading