Related Manuals for Kinderkraft I-BOOST i-Size
Summary of Contents for Kinderkraft I-BOOST i-Size
- Page 1 I-BOOST i-Size USER GUIDE MODEL: I-BOOST i-Size ECE R129.03 v.1.0 MODEL: I-GUARD ECE.R129.03 ver. 1.2...
- Page 2 1.0 Usage NOTE! Product graphics serve an illustrative function! The car seat has been designed, tested and approved for use in accordance with the requirements of UN/ECE Regulation No. 129 concerning the approval of child restraint systems (UN/ECE R129/03). The I-BOOST i -Size car seat is intended for for transporting children with a height between 135-150 cm (up to approximately 12 years).
- Page 3 Hight of the child Car seat setting Car seat mounting ISOFIX + three-point car seat belt 135-150cm Three-point car seat belt...
-
Page 4: Safety Instructions
2.0 Safety instructions Please take a few minutes to read this instruction manual in order to ensure the proper safety of your child. • The car seat MUST NOT be installed on the vehicle seats mounted backwards or sideways. • The car seat can only be installed on the vehicle seat with a three-point car seat belt. - Page 5 Please refer to your vehicle operating manual for information on the • Never leave your child unattended in the car seat. suitability of the vehicle seat for use with a car seat. • Make sure that the luggage and other objects are adequately secured, •...
- Page 6 • Do not use the car seat if its parts are damaged or loose. • On some vehicle seats made of delicate materials, the use of car seats may leave marks and/or discolouration. To prevent this from happening, • In the event of an emergency, it is important to quickly unfasten the safety you can place a blanket, towel or similar product under the car seat.
- Page 7 IMPORTANT! Make sure there are no gaps between the car seat and the vehicle seat. IMPORTANT! To ensure your child's comfort, move the front vehicle seat as far forward as possible to provide room for your child's legs.
-
Page 8: Isofix Installation
3.0 ISOFIX installation 1. Place the car seat on the vehicle seat. Press both sides of the ISOFIX release button and extend the ISOFIX connector arms to their maximum length. 2. Grasp the car seat with both hands and insert both latches into the places of installation on the vehicle seat. - Page 9 4.0 Installation of the car seat Note! The car seat should be placed directly on the vehicle seat. 4.1 Children between 135 and 150 cm - using the ISOFIX connectors and a three-point car seat belt. 1. Install the car seat on the vehicle seat using ISOFIX connectors forward facing 2.
- Page 10 4.2 Children between 135 and 150 cm tall - using a three-point car seat belt. 1. Install the car seat forward facing on the vehicle seat. 2. Push the car seat all the way to the vehicle seat. 3. Place your child in the car seat 4.
- Page 11 5.0 Removing the car seat (ISOFIX installation system) 1. Press the release button on both ISOFIX latches. (The latches will be released, and the colour of the ISOFIX indicators will change from green to red) 2. Insert the ISOFIX arms into the base of the car seat.
-
Page 12: Removing The Cover
5.1 Removing the cover 1. Starting at the bottom of the car seat, carefully remove the cover on both sides of the car seat 2. Pull the fabric off the armrests 3. Remove the fabric completely from the car seat by pulling it towards 5.2 Installing the cover To put the cover back on - just reverse the above sequence of actions. - Page 13 The full text of the Warranty Terms and Conditions is available on the NOTE! The car seat must not be used without the cover. website WWW.KINDERKRAFT.COM • The cover is removable and washable with a mild powder and using a program for delicate fabrics (30°C).