Related Manuals for Kinderkraft COMFORT UP i-Size
Summary of Contents for Kinderkraft COMFORT UP i-Size
- Page 1 COMFORT UP i-Size USER GUIDE MODEL: COMFORT UP i-Size ECE R129.03 v.1.0 MODEL: I-LITE ECE.R129.03 ver. 1.0...
-
Page 2: Car Seat Components
ATTENTION! Product graphics serve an illustrative function. Please read the operating manual carefully before using the child car seat for the first time. Ensuring the safety of the child is your responsibility, and not reading this instruction may have an impact on it. - Page 3 R129/03). 76cm - 105cm forward three-point car seat Internal safety The COMFORT UP i-Size car seat is designed for children from 76 cm to 150 cm in height and can be /≤18kg facing belt harness installed facing forward. In the range from 76 cm to 105 cm and up to 18 kg, the car seat is installed using a three-point seat belt.
-
Page 4: Safety Instructions
3.0 Safety instructions WARNINGS Please take a few minutes to read this instruction manual in order to ensure the proper security of your child. Many injuries that are easy to avoid are caused by reckless and improper use of the car seat. •... - Page 5 • Do not use replacement covers, other than those recommended by the manufacturer, as the • On some vehicle seats made of delicate materials, the use of car seats may leave marks and/or cover is an integral part of the safety system of the car seat. discolouration.
- Page 6 4.0 Use of insert The baby insert (fig. B.1, item 15) improves comfort and gives extra support for young children. We recommend using the lower part as well as the upper part, which serves as a pillow for the child's head until the child needs more space in the car seat.
- Page 7 5.0 Using the car seat 5.1 Adjusting the position of the internal safety harness and the headrest The adjustment of the car seat safety harness is integrated with the adjustment of the headrest. The headrest should be adjusted according to the child's height. The height of the safety harness will change with the height of the headrest.
- Page 8 ATTENTION! Proper adjustment of the headrest height has a direct impact on the child's safety. Place the car seat on the vehicle seat. Place your child in the car seat and check the height of the headrest. Attention! If necessary, repeat the steps to adjust the headrest height until you reach the optimal height 5.2 Securing the child with the inner harness straps •...
- Page 9 6.0 Installation in the car In the event of sudden braking or an accident, people not wearing car seat belts may injure other passengers. Always check whether: • The seat backrests in the vehicle are locked (i.e. the folding backrest of the rear seat is latched). •...
- Page 10 6.2 Forward-facing car seat installation for children between 100 and 150 cm tall using a car seat belt 6.2.1 Sowing away the internal safety harness • Unfasten the buckle (fig. F.1) • Remove the shoulder pads by unfastening their hook-and-loop fastener and the hook-and-loop fastener connecting them (fig.
- Page 11 6.2.2 Car seat installation Before installing the car seat, remove the safety harness of the car seat (see section 6.2.1). Remember: The baby insert and protective pads should be stored in a safe place for future use. • Adjust the headrest to the child's height (see section 5.1). •...
-
Page 12: Removing The Cover
7.0 Maintenance instructions 7.1 Removing the cover • Remove the insert if it is used (see section 4.1). • Remove internal safety harness if used (see section 6.2.1) • Remove the shoulder pads (fig. G.1) • Remove the pad at the buckle of the internal safety harness. (fig. G.2) •... - Page 13 8.0 Cleaning All key parts of the car seat should be checked regularly. Mechanical parts should function flawlessly. Only the original cover should be used, as it is an essential element of the safety of the car seat. ATTENTION! The car seat must not be used without the cover. •...