Related Manuals for Kinderkraft SAFETY FIX 2 i-Size
Summary of Contents for Kinderkraft SAFETY FIX 2 i-Size
- Page 1 SAFETY FIX 2 i-Size USER GUIDE MODEL: SAFETY FIX 2 i-Size ECE R129.03 v.1.0 MODEL: I-LITE ECE.R129.03 ver. 1.0...
- Page 2 ATTENTION! Product graphics serve an illustrative function. Please read the operating manual carefully before using the child car seat for the first time. Ensuring the safety of the child is your responsibility, and not reading this instruction may have an impact on it.
- Page 3 UN/ECE Regulation No. 129 concerning the approval of child improved restraint systems (UN/ECE R129/03). 76cm - 105cm forward Internal safety The SAFETY FIX 2 i-Size car seat is designed for children from 76 cm to 150 cm in height and can be ISOFIX + Top Tether /≤18kg facing harness installed facing forward.
-
Page 4: Safety Instructions
3.0 Safety instructions WARNINGS Please take a few minutes to read this instruction manual in order to ensure the proper security of your child. Many injuries that are easy to avoid are caused by reckless and improper use of the car seat. •... - Page 5 • Do not use replacement covers, other than those recommended by the manufacturer, as the • On some vehicle seats made of delicate materials, the use of car seats may leave marks and/or cover is an integral part of the safety system of the car seat. discolouration.
- Page 6 4.0 Securing the child 4.1 Use of insert The baby insert (fig. B.1, item 12) improves comfort and gives extra support for young children. We recommend using the lower part as well as the upper part, which serves as a pillow for the child's head until the child needs more space in the car seat.
- Page 7 5.0 Using the car seat 5.1 Adjusting the position of the internal safety harness and the headrest The adjustment of the car seat safety harness is integrated with the adjustment of the headrest. The headrest should be adjusted according to the child's height. The height of the safety harness will change with the height of the headrest.
- Page 8 5.2 Securing the child with the internal safety harness • Loosen the internal safety harness fully by pressing the button (4) and pulling the safety harness straps (fig. B.8). • Undo the buckle (5) and place the internal safety harness on the sides of the car seat (fig.B.8). Place the child in the car seat (fig.
- Page 9 6.0 Installation in the car In the event of sudden braking or an accident, people not wearing car seat belts may injure other passengers. Always check whether: • The seat backrests in the vehicle are locked (i.e. the folding backrest of the rear seat is latched). •...
- Page 10 6.1.2 Installation of the Top-Tether • Pull out the Top-Tether strap (16) and press the buckle release button to loosen it. The length of the strap must allow the hook to be placed on the anchorage point at the rear of the vehicle seat or in the trunk.
- Page 11 6.2 Forward-facing car seat installation for children between 100 and 150 cm tall using the ISOFIX system and a three- point car seat belt • Stow away the car seat internal safety harness before installation: -remove the shoulder pads from the car seat harness - loosen the harness as much as possible by pressing the adjustment button -pull the headrest adjustment strap and place the shoulder straps on the sides of the car seat -unfasten the snaps of the cover on the backrest of the car seat, exposing the plastic elements.
- Page 12 6.3 Forward-facing car seat installation for children between 100 and 150 cm tall using a three-point car seat belt • Adjust the height of the shoulder straps and the headrest to the height of the child (see section 5.1). • Place the car seat on the seat, making sure that the headrest of the seat does not interfere with the car seat's contact with the seat backrest.
- Page 13 7.0 Maintenance instructions 7.1 Removing the cover • Remove the insert if it is used (see section 4.1). • Remove the internal safety harness if it was used • Remove the shoulder pads • Remove the pad at the buckle of the internal safety harness. •...
- Page 14 7.2 Cleaning All key parts of the car seat should be checked regularly. Mechanical parts should function flawlessly. Only the original cover should be used, as it is an essential element of the safety of the car seat. ATTENTION! The car seat must not be used without the cover. •...