Toshiba nv Series Instruction Manual page 9

Introduction
This manual describes the functions, methods of installation and setting, and maintenance and
inspection of the single bus Ethernet (EN811) module ("EN811 module" hereafter) for connecting
the monitoring control network Ethernet to the Unified Controller nv series.
To use this device correctly, read "Safety precautions" first.
The manuals related to the EN811 module are as follows.
• Unified Controller nv series Main Unit Operation Manual
Describes the main unit hardware of the nv series controller.
• Unified Controller nv series Type 1 Function Manual
Describes the functions and basic use of the nv series Type 1.
• Unified Controller nv series Type 2 Function Manual
Describes the functions and basic use of the nv series Type 2.
• Unified Controller nv series/Integrated Controller V Series Command Manual
Describes the detailed specifications of the instruction words of the program languages (LD,
FBD, and SFC) supported by the nv series and Integrated Controller V Series.
• Unified Controller nv series/Integrated Controller V Series nV-Tool (Basic)
Operation Manual
Describes how to create, debug, print, and save programs using nV-Tool.
• Unified Controller nv series Ethernet (EN811) Module Manual
document)
Describes the single bus Ethernet module, which is common to Type 1 and Type 2 of the nv
series.
(6F8C1220)
Unified Controller nv series Ethernet (EN811) Module Operation Manual
(6F8C1221)
(6F8C1362)
(6F8C1226)
(6F8C1290)
(6F8C1358) (This
vii