Toshiba nv Series Instruction Manual page 77

A.2 Ethernet transmission specifications
Applicable standard
Media access method
Data transmission speed
Ethernet frame
Topology
Transmission path
Transmission cable/cable
length
Node count
Maximum number of EN811
module implemented
Interface
(Note) According to the specifications of the applicable system.
A.3 Function specifications
Protocol
Transmission method
Monitoring function (RAS)
System configuration
Port used by the EN811 module PCMP
(Note 1) PCMP is Toshiba's protocol.
(Note 2) Check the transmission of the transmission data at the application level.
A.2 Ethernet transmission specifications
Table A-2 Ethernet transmission specifications
Item
IEEE 802.3ab
•1000BASE-T
CSMA/CD method
10Mbps/100Mbps/1Gbps
DIX type
Star shape
Single bus
Category 6/Category 5e
Twisted pair cable: Max.100m
Max. 254 nodes/system (single bus) (Note)
Max. 4 units/1 basic unit (multi-port)
RJ-45 connector
Table A-3 Function specifications
Item
TCP/UDP/IP , PCMP(Note)
• Point-to-point transmission
• Multicast transmission
• Broadcast transmission
Hardware/software
• Multi-port
Max. number of Ethernet modules: 4
Node diagnosis
Unified Controller nv series Ethernet (EN811) Module Operation Manual
A.3 Function specifications
Specification
Specification
Port number 10000
Port number 48000
63