Toshiba nv Series Instruction Manual page 41

Note
• If the controller is in a redundant configuration, the module parameters of the EN811
can be downloaded independently by selecting [Primary (P)] and [Secondary (S)]
from [Transmission target].
Restart it.
The downloaded information becomes effective at the next startup.
After the download is complete, restart it.
From the product tree, set the network.
Select the network under the system, and select [New (W)].
Figure 3-10
Select [EtherLAN] from the network addition dialog.
Select the module under the selected [EtherLAN], and then select
[New (W)].
Figure 3-11
Network registration screen
Network addition dialog
Unified Controller nv series Ethernet (EN811) Module Operation Manual
3.3 Setting with the engineering tool
27