VIA Technologies VAB-820 Quick Start Manual page 28

For Smart ETK demo program, the CAN bus 1 is can0 and the CAN bus 2 is can1.
The first step is to set the BitRate value and click on the Connect
Please note that you need to disable the CAN bus first then set the CAN bus bitrate. The
CAN bus bitrate should be 5000 < [BRT_value] < 1000000.
When other devices transfer data to the VAB-820, the data will be displayed inside the red
frame.
To send data to other devices, you need to type ID and data inside the white frame and
click the Send Send button.
Send Send
Click on the Reset Reset button to reset this function.
Reset Reset
Click on the Disconnect Disconnect button to disable this function.
Disconnect Disconnect
VAB- - - - 820 VAB VAB VAB 820 A A A A ndroid BSP v 820 820 BSP v4 4 4 4 .0.2 Quick Start Guide BSP v BSP v
Connect button. Connect Connect
.0.2 Quick Start Guide .0.2 Quick Start Guide .0.2 Quick Start Guide
24