Introduction Introduction The purpose of this document is to provide a practical introduction on developing software for the AMOS-820 (Bare board: VAB-820 Freescale i.MX6 Quad) on a Yocto Project development host. 1.1. Overview AMOS-820 HMI SP v2.0 is developed based on fsl-yocto-3.10.17_1.0.0 (Yocto 1.5 Dora) and enables hardware features defined in VAB-820.
To set the HDMI as display output. run o_hdmi [LVDS] [LVDS] [LVDS] [LVDS] AMOS-820 supports three LVDS types by default since v2.0.0. • AUO 22” G220SVN01.0 (1680 x 1050) • AUO 10.4” G104XVN01.0 (1024 x 768) • AUO 7" G070VW01 V0 (800 x 480) User can check LVDS parameters in U-boot by typing “pri”:...
Need help?
Do you have a question about the AMOS-820 and is the answer not in the manual?
Questions and answers