How To Change Screen Settings - urmet domus IPerCom 1741 Configuration Booklet

4.2.3 How to change screen settings

To change screen settings:
• Turn on the screen, if off, by tapping it at any point or by pressing the Home button.
• Press the icon to access the Top Page and then the
application.
• Press the icon in the upper right corner to access the video door phone configurations page:
• Tap the writing Video. A window opens listing the various screen parameters (the current value is
shown to the right of each parameter):
– Screen Brightness.
– Idle Timeout, i.e. the idle time delay after which the screen will go off.
– Default Video Mode For Calls, i.e. the screen format (16:9 o 4:3 o large buttons) for incoming video
door phone calls. The video format can be changed, temporarily, even during a call via the icon
• Tap the parameter that you wish to change. A pop-up window opens where you can change the
current parameter via a slider control or select a new setting from a given list.
• Select the required parameter or tap the X icon at the top right to close the window without making
any changes.
4.2.3.1 Large buttons mode
To activate the following mode, follow the procedure indicated:
• Press the Video Appearance on Call parameter (see previous paragraph) and select Big Buttons mode.
• When the following mode is activated, the call screens are displayed in 4:3 mode and the button icons
appear larger than in the standard mode.
48
icon for the video door phone
DS1741-004
.