urmet domus 1722 User Manual
One- and two-household video door phone kit mininote+ mikra2
Hide thumbs
Also See for 1722:
- Installation and use manual (68 pages) ,
- Installation and use handbook (40 pages) ,
- Manual (40 pages)
Related Manuals for urmet domus 1722
Summary of Contents for urmet domus 1722
- Page 1 Mod. 1722 DS1722-129 LBT20731 ONE- AND TWO-HOUSEHOLD VIDEO DOOR PHONE KIT MININOTE+ MIKRA2 Ref.1722/95 - 1722/96 COMPLETE VIDEO DOOR PHONE USER'S GUIDE...
-
Page 2: Table Of Contents
Contents DESCRIPTION OF COMPONENTS ......................3 FUNCTIONS ............................. 4 HOW TO TURN ON THE SCREEN AND ACCESS THE VARIOUS FUNCtION ......4 HOW TO CHANGE VIDEO DOOR PHONE SETTINGS ..............5 2.2.1 How to change the video door phone language..............5 2.2.2 How to change the video door phone date and time ............ -
Page 3: Description Of Components
1 DESCRIPTION OF COMPONENTS 7” touchscreen display Microphone Active Mute red indicator LED Sent Yokis control confirmation blue LED ON/OFF button Speakers LBT20731 DS1722-129... -
Page 4: Functions
2 FUNCTIONS HOW TO TURN ON THE SCREEN AND ACCESS THE VARIOUS FUNCTION Tap the screen at any point, or Press the button (5) at the bottom right of the screen to bring up the Home Page. The Home Page is the following: and gives access to the following functions: View footage from the video camera. -
Page 5: How To Change Video Door Phone Settings
Access to a QR Code referring the user to an area of the Urmet website where instruction manuals, demo videos, etc. can be downloaded. HOW TO CHANGE VIDEO DOOR PHONE SETTINGS 2.2.1 How to change the video door phone language ... -
Page 6: How To Change The Audio Settings
Turn on the screen, if off, by tapping it at any point or by pressing the button (5) in the bottom right corner of the screen. Tap the icon to go to the general configurations page. Tap the icon . The following window will be displayed: The icon displays only in systems equipped with Kit Ref.1722/96. LBT20731 DS1722-129... -
Page 7: How To Activate The Automatic Image Storage Mode
If necessary, repeat the previous steps for the remaining video door phones (icons With Kit Ref.1722/96 you can name the button too, that allows to call the video door phone assembly associated with the second button of the calling station. -
Page 8: How To Configure Yokis Home Automation Buttons
2.2.6 How to configure Yokis Home Automation buttons. For the configuration of Yokis Home Automation buttons please refer to the dedicated instruction manual, available on the Urmet website in \Products\Online Catalogue area, after searching by product code. Alternatively, the manual can be downloaded by scanning the QR Code below with your smartphone or tablet. -
Page 9: How To Answer An External Call
HOW TO ANSWER AN EXTERNAL CALL When the CXModo Video door phone receives an outdoor door phone video call, it rings and the screen lights up from its default switched-off state. By tapping the various icons you can: Answer the call and begin a hands-free conversation; then, to end the call press the same icon once again, the screen will turn itself off. -
Page 10: How To Make Video Switching Between Video Door Phones
HOW TO MAKE VIDEO SWITCHING BETWEEN VIDEO DOOR PHONES The call tone will be generated in alternating manner by the different video door phones after a call if "Slave" video door phones (OP3) are present in the system. The 'Master' video door phone will enable also the video door phone switching on. -
Page 11: How To Make An Intercom Call
HOW TO MAKE AN INTERCOM CALL This feature is available only if the system includes one or more Slave video door phones and if the video door phones have been correctly configured as described in the system installation manual. ... - Page 12 The conversation will stop after about 3 minutes. With Kit Ref.1722/96 also the icon displays. This will send an intercom call to the video door phone assembly associated with the second button of the calling station. LBT20731...
-
Page 13: How To View The Stored Snapshots Present In The Video Door Phone
HOW TO VIEW THE STORED SNAPSHOTS PRESENT IN THE VIDEO DOOR PHONE You can view previously stored snapshots by following these steps: Turn on the screen, if off, by tapping it at any point or by pressing the button (5) in the bottom right corner of the screen. -
Page 14: How To Activate A Yokis Control
HOW TO ACTIVATE A YOKIS CONTROL From the Home Page press the button to access Yokis Home Automation: From here, select your required control(s). To schedule a control for one or more weekly occurrences, from the Home Page of the video door phone, press the icon 'Settings' and then select 'Yokis' . - Page 15 Select the button that you wish to schedule, e.g. the first one. You will display: Tap the icon and select the scheduling time and days in the following screen: WARNING: the scheduling only becomes active if the 'Enable' box is ticked with a check mark. To return to the Home Page, press 'OK' twice to confirm the changes and then 'BACK' twice.
- Page 16 DS1722-129 LBT20731 Area tecnica URMET S.p.A. servizio clienti +39 011.23.39.810 10154 TORINO (ITALY) http://www.urmet.com VIA BOLOGNA 188/C e-mail: info@urmet.com Telef. +39 011.24.00.000 (RIC.AUT.) +39 011.24.00.300 - 323 LBT20731 DS1722-129...
Need help?
Do you have a question about the 1722 and is the answer not in the manual?
Questions and answers