2.19
DOOR OPEN INDICATION
The video door phone has the
door has remained open on one or more entries. The door open condition is signalled by the call stations
only if the duration of this event is at least 30 seconds.
The function must be enabled by the installer when configuring the Ipercom system.
The function is related to the status of the SP terminal of call stations and requires a door open sensor.
ATTENTION! The door open indication is displayed only on video door phones on which door opening
was carried out following the last call received.
In addition to the icon on the display, the LED of the Home key
phone.
When the door or any doors left open are closed, the icon will no longer be visible on the display and the
Home button LED will stop flashing.
2.20
MAKING AN INTERCOM CALL
To make an intercom call with another video door phone, proceed as follows:
• Access the main page of the Video Door Phone application
• Press the
icon.
• The address book opens, it contains:
– the contacts uploaded by the installer identified by the word System (for more information see the
Ipercom handbook on the www.urmet.com) website,
– the contacts added later by the user (directly from a Max video door phone),
– Video door phones present in the same apartment.
To add a new contact directly from a Max video door phone follow the procedure described in section
How to add new contacts to your address
• To call a contact in the directory, press the
• The following screen is displayed and the call is initiated.
20
icon in the upper bar of the display, which indicates whether the
book.
icon next to the name.
flashes on the video door
.
DS1741-004
Need help?
Do you have a question about the IPerCom 1741 and is the answer not in the manual?