Accessibility - urmet domus IPerCom 1741 Configuration Booklet

5. Press the "Activate and verify" button to activate the function.
If successful, a screen confirming the activation of the function is displayed.
If unsuccessful, a screen indicating the function activation failure is displayed. Carry out the
procedure again, making sure that you are carrying out the steps described correctly (for more
information, refer to chapter "Setting up the call forwarding function" in the Ipercom system
technical manual on www.urmet.com).
CallMe Manager support disabled on Ipercom system
1. upload the Urmet CallMe app from the Apple Store (iOS) or Play Store (Android)
2. Create an account on Urmet Cloud through the CallMe App.
For the procedure for creating an account through the CallMe App, refer to the appendix "CallMe
App Configuration" on the Ipercom system technical manual on www.urmet.com
3. On the video door phone, press "Activate/Verify Call Forwarding Service".
4. On the smartphone where the CallMe App is installed, start the application.
5. Press the button: "Settings" → "Service Management" → "My Devices" → "Add".
6. The QR Code reader application on your smartphone is launched. Use your smartphone to scan
the QR code displayed on the video door phone.
7. On the video door phone, press the "Activate and verify" button to activate the function.
If successful, a screen confirming the activation of the function is displayed.
If unsuccessful, a screen indicating the function activation failure is displayed. Carry out the
procedure again, making sure that you are carrying out the steps described correctly (for more
information, refer to chapter "Setting up the call forwarding function" in the Ipercom system
technical manual on www.urmet.com).

4.2.5 Accessibility

The following menu item allows configuring and enabling different operating modes of the video door
phone. To perform configuration, proceed as follows:
• Switch on the screen by tapping it any point or by pressing the Home button.
• Press the icon to access the Top Page and then the
application.
• Press the icon in the upper right corner to access the video door phone configurations page:
DS1741-004
icon for the video door phone
53