2.11
HOW TO ACTIVATE THE VIDEO DOOR PHONE VOICEMAIL
To activate the Video Door Phone Voicemail:
• Tap the icon
• Select the RECORDING
• The icon displayed switches from
From this moment onwards, all calls from the outdoor station will ring the Video door phone and will be
recorded. The user may choose to answer the call while the voicemail message is being recorded. In this
case, the recorded message will not be stored.
The Video Door Phone Voicemail can be set up according to the 3 different operation modes:
• in the calling phase recording is immediately activated on the Video door phone;
• in the calling phase a customised audio message is played at the outdoor calling station;
• in the calling phase a customised audio message is played at the outdoor calling station and a beep
is heard after which to leave a message.
For more details see the section "Configurations".
2.12
HOW TO TURN OFF THE VIDEO DOOR PHONE VOICEMAIL
To turn off the Video Door Phone Voicemail:
• Press the
icon in the lower right corner.
• Select the AT HOME
• The icon displayed switches from
From this moment onwards, all calls from the outdoor calling station will not be recorded.
2.13
ACTIVATING THE "REMOTE" MODE
The "Remote" mode allows forwarding an audio/video or audio only call to a smartphone with Android or
iOS operating system.
ATTENTION! The call forwarding function must be configured and activated on the video door phone in
order to enable this mode (for more information, refer to chapter
To activate the "Remote" mode:
• Press the
icon in the lower right corner.
REMOTE icon.
• Select the
• The icon displayed switches from
From now on, in addition to the video door phones, smartphones on which the CallMe App has been
installed and configured will also ring.
2.14
DEACTIVATING THE "REMOTE" MODE
To deactivate the "Remote" mode.
• Press the
icon in the lower right corner.
• Select the AT HOME
• The icon displayed switches from
DS1741-004
in the bottom right corner.
button.
to
icon.
to
to
icon.
to
.
.
"Call forwarding
.
.
settings").
17
Need help?
Do you have a question about the IPerCom 1741 and is the answer not in the manual?