Configure The Networks; Show Configuration Qr Code; Ipercom Configuration; How To Activate The Screen Saver Function - urmet domus IPerCom 1741 Configuration Booklet

4.1.6 Configure the Networks

To configure the networks of the video door phone, follow the procedure below:
• Turn on the screen, if off, by tapping it at any point or by pressing the Home button.
• Press the icon to access the Top Page.
• Press the icon to access the video door phone parameter configuration page.
• Press the Network parameter to display the screen where the available networks are listed
The network settings identified as ''POE Port (Video Door Phone)'' cannot be changed.

4.1.7 Show configuration QR Code

The following parameter is dedicated to the installer for configuration of the Ipercom System (for more
information, refer to the Ipercom technical manual on www.urmet.com).

4.1.8 IperCom configuration

The following parameter is dedicated to the installer for configuration of the Ipercom System (for more
information, refer to the Ipercom technical manual on www.urmet.com).

4.1.9 How to activate the screen saver function

When the video door phone is in standby mode, the Screen Saver function allows images to be displayed
on the screen.
To configure the Screen Saver function, follow the procedure below:
44
DS1741-004