urmet domus IPerCom 1741 Configuration Booklet page 55

In this mode, it is not possible to access the address book of the video door phone due to the lack
of visual feedback from the user. However, it is possible to define two contacts in the phonebook as
favourites that can be called by means of a single tap or a double tap on the screen on the main
page. You can also associate the switchboard as a contact.
— The Single/Double Tap in Standby Action parameters can be used to set the action that will be
performed by the video door phone when the user taps on the screen once or twice on the main
page. For example, calling the favourite contact or opening the door or opening the gate.
— On the configuration page, press the Favourite Contact 1 parameter (single tap) and select the
contact to call when the user taps once on the main page from the scroll window. The Favourite
Contact 2 (double tap) parameter can be used to associate the number to call when the user taps
the main page twice.
If the parameter configures the opening of a door or gate as an action, it will not be possible to
make the call to the default contact.
— Tap on Visually impaired user mode and select Enabled.
4.2.5.1.1 Using visually impaired user mode
Below is an example of the main screen with visually impaired user mode active.
With the active mode, it is no longer possible to display all the various icons on the normal main screen
(e.g. panic alarm, voice memo, door opening, gate opening, etc.)
DS1741-004
55