How To Listen To An Audio Message; How To Call The Switchboard - urmet domus IPerCom 1741 Configuration Booklet

Press the RECORD
icon to start a new recording. The maximum length of the message is 10
seconds. The remaining recording time is displayed by a progress bar.
To stop recording before the end of the available time tap the STOP button.
At the end of the recording, the message is automatically saved, with recording date and time, the LED
starts flashing and a message appears on the relevant icon.
The recorded message will be automatically deleted after 30 days.

2.6.2 How to listen to an audio message

The presence of new audio messages is signalled by:
• flashing blue LED ;
• a number in the bottom right corner in the icon of the Audio messages (the number refers to
how many new messages there are).
To listen to a message, press the icon. Messages are listed by date and time.
Select the desired message and press the PLAY
icon to start playback. Message playing cannot be
stopped before it ends.
Press the icon to delete the message.
When there are no more new messages to listen to, the signaling LED turns off and the icon of Audio
Messages function returns to the default state .
2.7

HOW TO CALL THE SWITCHBOARD

If the Video Door Phone system has a switchboard, to call it:
• Access the main page of the Video Door Phone application.
• Tap the icon .
The call is forwarded only to the respective switchboard (for more information see the Ipercom handbook
on the www.urmet.com website). If the switchboard operator cannot answer, for example, because they
are not there, the call is stored as a missed call.
15
DS1741-004