Table of Contents
Advertisement
I
A
NDIVIDUAL
CCOUNT
The
has 3 line appearances, each with an independent SIP account. Each SIP account
GXV300x
requires its own configuration page. Their configurations are identical.
T
13: SIP A
ABLE
CCOUNT
Account Active
Account Name
SIP Server
Outbound Proxy
SIP User ID
Authenticate ID
Authenticate Password
Name
Use DNS SRV
User ID is Phone Number
SIP Registration
Unregister on Reboot
Register Expiration
SIP Registration Failure-
Retry Wait Time
Local SIP port
Grandstream Networks, Inc.
S
ETTINGS
C
P
D
ONFIGURATION
AGE
This field indicates whether the account is active. The default value for the primary account
(Account 1) is Yes. The default value for the other two accounts is No.
The name associated with each account - displayed on LCD.
SIP Server's IP address or Domain name provided by VoIP service provider.
IP address or Domain name of Outbound Proxy or Session Border Controller.
Used by GXV300x for firewall or NAT penetration in different network environment.
If it detects symmetric NAT, STUN will not work.
ONLY OBP or session border controller can provide solution for symmetric NAT.
User account information provided by VoIP service provider (ITSP).
It is either an actual phone number or something formatted like one.
SIP service subscriber's Authenticate ID used for authentication.
It can be identical to or different from SIP User ID.
SIP service subscriber's account password for GXV300x to register to (SIP) server.
SIP service subscriber's name that is used for Caller ID display.
Default is No.
If set to "Yes", phone will use "Preferred DNS SRV" (Basic Setting Page) to look up server.
If the GXV300x has an assigned PSTN telephone number, this field should be set to "Yes".
Otherwise, set it to "No". If "Yes" is set, a "user=phone" parameter will be attached to the
"From" header in SIP request to indicate the E.164 number
This parameter controls whether the GXV300x needs to send REGISTER messages to the
proxy/server. The default setting is "Yes".
Default is No. If set to "Yes", the SIP user's registration information will be cleared on re-
boot and "*" will be in SIP Contact header to notify the server to unbinding all.
This parameter allows user to specify the time frequency (in minutes) that GXV300x re-
freshes its registration with the specified registrar. The default interval is 60 minutes. The
maximum interval is 65,535 minutes (about 45 days).
Retry registration if the process failed.
Default is 20 seconds.
This parameter defines the local SIP port used to listen and transmit.
The default value for Account 1 is 5060. It is 5062, 5064 for Account 2 and Account 3.
GXV300x User Manual
Firmware 1.2.3.7
EFINITIONS
Page 32 of 54
Updated: 12/2010
Advertisement
Table of Contents
