Table 7: Gxv Button Definitions - Grandstream Networks GXV300x Series User Manual

Table 7: GXV Button Definitions

Key Button
LINE1-LINE3
UP ↑
DOWN ↓
LEFT
RIGHT
OK
TRNF
CONF
MESSAGE
CAMERA BLOCK
MUTE/DEL
CAMERA LOOPBACK DIS-
PLAY and OSD ON/OFF
ADDRESS BOOK
SPEAKER
HOLD
SEND
Grandstream Networks, Inc.
Key Button Definitions
3 Line keys with LED, can be configured to different SIP profiles or providers
Use button to select next "Menu Item" when phone is in keypad configuration
mode; Or increase handset/speakerphone volume when phone is ACTIVE; Or
increase ring volume when phone is in IDLE mode
Use button to select previous "Menu Item" when phone is in keypad configure
mode; Or decrease handset/speakerphone volume when phone is ACTIVE;
Or decrease ring volume when is in IDLE mode
Shift cursor to left
Shift cursor to right. Also function as shortcut to bring up Call History when
phone is in IDLE state.
Enter Keypad Configuration "MENU" mode when phone is in IDLE mode. Use
as ENTER key when in Keypad Configuration.
TRANSFER key: Transfer an ACTIVE call to another number
Press CONF button to connect Calling/Called party into conference
Enter to retrieve (video) voice mails or other messages
Enable/Disable Camera for privacy. Block camera to make call without video.
When button is activated, a red icon will flash on the LCD and the phone func-
tions as a normal IP phone
Enable/Disable Mute.
On an active call, press button MUTE the call;
When using in keypad configuration, function as DELETE key;
Activate/De-activate do-not-disturb (DND) when idle;
Reject an incoming call during ring stage (send caller directly to voicemail if
user has a voicemail)
Enable/Disable camera local loopback display; On Screen Display (OSD),
function like loop switch when pressed.
XML based Video Phone Address Book
Enable/Disable hands-free speaker phone mode
Place ACTIVE call on hold
Press SEND to dial a new number or ReDial the last number dialed.
GXV300x User Manual
Firmware 1.2.3.7
Page 11 of 54
Updated: 12/2010