Grandstream Networks GXV300x Series User Manual page 33

Call Progress
Using these settings, users can configure ring or tone frequencies based on parameters from local
Tones
telecom. By default, they are set to North American standard.
Frequencies should be configured with known values to avoid uncomfortable high pitch sounds.
Syntax: f1=val,f2=val[,c=on1/off1[-on2/off2[-on3/off3]]];
(Frequencies are in Hz and cadence on and off are in 10ms)
ON is the period of ringing ("On time" in 'ms') while OFF is the period of silence. In order to set a
continuous ring, OFF should be zero. Otherwise it will ring ON ms and a pause of OFF ms and
then repeat the pattern. Up to three cadences are supported.
Disable Default is No. If set to Yes, the call waiting will be disabled.
Call-Waiting
Disable Default is No. if set to Yes, the call waiting tone will be disabled.
Call-Waiting Tone
Disable Default is No. If set to Yes, the direct IP call will be disabled and not working.
Direct IP Call
Use
Make an direct IP call by dialing last octet of IP address (3 digits instead of 12 digits IP address) if
Quick IP-Call
phones are in the same LAN/VPN. No SIP server required and that field should be blank.
Mode
Default setting is No.
When set to YES, if #XXX# is dialed, where X is 0-9 and XXX <=255, phone will make direct IP
call to aaa.bbb.ccc.XXX where aaa.bbb.ccc comes from the LAN/VPN IP address REGARDLESS
of subnet mask.
#XX or #X also valid so leading 0 is not required (but OK). See Quick IP Call Mode for details.
Allow Media
Default is No.
Loopback
If set to Yes and server/proxy supports this feature, phone will feed loopback information to server.
Lock keypad
Default is No. If set to "Yes", the configuration changes via keypad are disabled.
update
Caution:
Phone could get LOCKED if user configured this option but forgot administration password or
WebUI access broken.
Display Language User can choose another display language on LCD and the phone's web UI.
Language file postfix allows the language file to have different postfixes so the phone can request
a particular file. It will append an underscore "_" plus the string in the language file postfix.
The default language file name is "gxv.lpf". If the field "Language File postfix "has "NL" string in it,
then the phone will request "gxv_NL.lpf" instead of "gxv.lpf."
Supported language: Catalan, Czech, Dutch, Estonian, Finnish, French, German, Italian, Polish,
Portuguese, Slovak, Slovenian, Spanish, Swedish and Turkish.
How to set up Secondary Language:
1. Download the language package from
2. Unzip the language package
3. Open the desired language zip file
4. Copy gxv.lpf to the firmware server directory
5. Access the advanced settings of the Web GUI, modify the "Firmware Server Path" and check
"Downloaded Language"
6. Update and reboot the phone
Grandstream Networks, Inc.
http://www.grandstream.com/firmware.html
GXV300x User Manual
Firmware 1.2.3.7
Page 31 of 54
Updated: 12/2010