Table of Contents
Advertisement
Disable SIP User Display
Disable IP Address Display Default is No. If enabled, the IP address of the phone will not be shown on the LCD
LCD Screen Saver
Start Interval
LCD Screen Saver
Refresh Interval
LCD Auto Power Off
Interval
LCD Backlight Brightness
LCD Contrast
LCD Chroma Saturation
LCD Text Color
OSD Text Color
PIP Position
Starting Video OSD/PIP
Mode
Camera Zoom Mode
Camera Exposure
Camera Color Mode
Camera White Balance
Camera Lens Correction
TV Output
A
U
C
DVANCED
SER
ONFIGURATION
The Advanced User configuration includes not only the end user configuration, but also advanced confi-
guration such as SIP configuration, Codec selection, NAT Traversal Setting and other miscellaneous con-
figuration.
Login to the Advanced User Configuration page following the same directions as in Basic Configuration.
The factory default password for Advanced User is "admin". User may change the password. The pass-
word is case sensitive with a maximum length of 25 characters.
Grandstream Networks, Inc.
Default is No. If enabled, SIP User ID will not be shown on the LCD
Default value is 60 seconds, 0 means turn off this feature.
After 60 seconds the Screen Saver will start. The Screen saver file stored in flash is limited to
20 images or 320kb. Change screen saver in the same way as customized ring tone.
Default is 10.
This parameter controls the picture changing speed showed on the LCD.
Default value is 300 seconds. 0 means LCD is always ON
After 300 seconds of idle time, the LCD will automatically Power Off.
Default value is 128.
Default value is 128
Default value is 128
Change the LCD font text color, adjust via selected numbers. Default is 255
Select desired OSD (On Screen Display) Text color from drop down box.
Default is white. The color can distinguish OSD from video background
Local Mirror Images showed via Picture in Picture positions in the LCD. Default is Top Left.
Default value is OSD On, PIP On
Select desired camera zoom mode (Wide, Optical Tele, Digital Tele). Can adjust local video
zoom either in mirror mode or during the call (on the fly) by pressing the Left or Right Arrow
Key
Select desired Camera Exposure mode based on surroundings. Default to Auto
Select desired Camera Color Mode (Color or Monochromatic). Default to Color Mode
Select desired Camera White Balance to be automatic or Fixed. Default to Auto
Correct Camera Lens noise. Default is Yes.
Recommend set to YES to reduce camera lens noise and improve video quality.
Select desired TV Output type (PAL or NTSC).
GXV300x User Manual
Firmware 1.2.3.7
Page 26 of 54
Updated: 12/2010
Advertisement
Table of Contents
