Table of Contents
Advertisement
PSS-106 Battery Speaker
Installation of the Batteries (Wireless Microphone)
The wireless microphone is delivered without batteries. It accepts 2 x AA LR6 (alkaline) batteries.
Rechargeable Ni-Cad batteries can be used but they do not supply adequate current for more than 4
hours.
To install the batteries:
Turn the battery cover clockwise and remove it (Fig. 10).
Insert 2 x AA LR6 batteries into the battery compartment.
Put the battery cover back and turn it counterclockwise to tighten it.
Note:
Make sure that you install the batteries with correct polarity orientation.
Product code: D2612/D2613
16
Fig. 10
Advertisement
Table of Contents
