PSS-110 MKII Warning Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling.
PSS-110 MKII IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized modification to the system. Never let the power cord come into contact with other cables! Handle the power cord and all •...
PSS-110 MKII Connection with the mains Connect the device to the mains with the power-plug. Always pay attention, that the right color cable is connected to the right place. International EU Cable UK Cable US Cable BROWN YELLOW/COPPER FASE BLUE...
PSS-110 MKII Description of the device Features The PSS-series MKII is the successor of the PSS-series with a complete new design in a lightweight ABS housing. The PSS-series MKII is a completely portable PA system powered with an internal battery. When it is used on mains power, the battery will be charged automatically.
Pairing status indicator: Blinking: pairing in progress Continuous: Microphone connected with PSS-110 MKII Volume control wireless microphone 1 Turn this control to adjust the volume of the wireless microphone 1. Pair button wireless microphone channel 2 Press and hold down for about 5 seconds to enter pairing status.
Page 8
RCA unbalanced input Channel 3 Unbalanced stereo RCA jacks. Line out Connect to the line input of a mixer. If you use the PSS-110 MKII together with DAP Splash active speakers, use a mono-to-mono jack cable. Voice priority Decreases the volume of all channels, except for microphone 1 and the (1 or 2) wireless mic(s).
Page 9
PSS-110 MKII Fig. 04 Display Previous track Press this button to restart a current track or select a previous track. Increase volume Press the VOL+ button to increase the volume. Repeat All - 1 – A (Shuffle play) Press this button to repeat a track, folder or all tracks.
PSS-110 MKII Wireless Microphone Fig. 06 Power/Pair button • Press and hold down this button for 0,5 second to power the microphone on/off. Press and hold down this button for 5 seconds to pair the transmitter and receiver. • LED indicator...
PSS-110 MKII Installation Remove all packing materials from the PS-110 MKII. Check that all foam and plastic padding is removed. Connect all cables. Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty.
PSS-110 MKII USB/MP3 Operations MP3 USB Cards The file system should be FAT16 or FAT32. The maximum capacity is 64 Gb. Selecting Tracks (27) or (23) buttons to skip to a previous/next track. 01) Press the 02) Playback will begin automatically, once a new track has been selected.
04) If all of the above appears to be O.K., plug the unit in again. 05) If you are unable to determine the cause of the problem, do not open the PSS-110 MKII, as this may damage the unit and the warranty will become void.