PSS-106 Battery Speaker
1.
Introduction
Before Using the Product
Important
Read and follow the instructions in this user manual before installing, operating or
servicing this product.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual.
After unpacking, check the contents of the box. If any parts are missing or damaged, contact your
Highlite International dealer.
Your shipment includes:
●
DAP PSS-106 Battery Speaker
●
Antenna (only in D2613)
●
Wireless microphone (only in D2613)
●
Wireless microphone receiver (only in D2613)
●
Schuko to IEC power cable (1,5 m)
●
User manual
Intended Use
This device is designed to be used as a wireless loudspeaker. It is suitable only for indoor use. Any
incorrect use may lead to hazardous situations and result in injuries and material damage.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Text Conventions
Throughout the user manual the following text conventions are used:
●
Buttons:
●
References:
●
0–255:
●
Notes:
Product code: D2612/D2613
All buttons are in bold lettering, for example "Press the UP/DOWN buttons"
References to chapters and parts of the device are in bold lettering, for example:
"Refer to 2. Safety", "press the power switch (03)"
Defines a range of values
Note: (in bold lettering) is followed by useful information or tips
4
Fig. 01