Media Player; Connecting Auxiliary Signal Sources; Control Modes; Aux Mode - DAPAudio PSS-106 User Manual

PSS-106 Battery Speaker

Media Player

Connecting Auxiliary Signal Sources

Use the aux signal input connector (40) to connect auxiliary signal sources.

Control Modes

There are 3 control modes:
●

Aux Mode

● MP3 Mode (USB or SDcard)
● Bluetooth Mode
Repeatedly press the MODE button (36) to toggle through the available control modes.
Aux Mode
For this control mode to work, connect an auxiliary signal source to the aux signal input connector (40).
Press the MODE button (36) until the display (35) shows LINE.
● Press and hold down the FORWARD/VOLUME + and BACKWARD/VOLUME – (37/39) buttons to
decrease/increase the volume. The adjustment range is 0–27, from low to high volume.
● Press the PLAY/PAUSE button (38) to mute the auxiliary signal.

MP3 Mode

For this control mode to work, insert a USB flash drive into the USB input connector (34) or an SDcard into
the SDcard input connector (41). The device will automatically read the MP3 files from the currently
inserted source.
If multiple sources are inserted, press the MODE button (36) until you select the desired source.
Note: The USB flash drive should be FAT32-formatted and its maximum capacity should not exceed 32 GB.
● Repeatedly press the FORWARD/VOLUME + and BACKWARD/VOLUME – (37/39) buttons to select
tracks backward/forward.
● Press and hold down the FORWARD/VOLUME + and BACKWARD/VOLUME – (37/39) buttons to
decrease/increase the volume. The adjustment range is 0–27, from low to high volume.
● Press the PLAY/PAUSE button (38) to play the currently selected track. Press the button again to
pause the playback.
Product code: D2612/D2613
23
Fig. 15