Table of Contents
Advertisement
Description of the device
Features
The K-112 is a 12" 2-way Fullrange speakersystem:
• 12/1 passive plastic vented PA speaker system
• Woofer:
• High Driver:
• Nominal Impedance:
• Power Handling:
• Freq. Response (-3 dB):
• Freq. Range (-10 dB):
• Sensitivity (Full Space):
• Peak SPL at 1m (Theoretical):
• Nominal Dispersion (HxV):
Overview
Installation
Remove all packing materials from the K-112. Check that all foam and plastic padding is removed.
Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 240V power, or vice versa.
Do not supply power before
12", 8 Ohm
63 mm Voice Coil
1.375" Titanium
Dome, 8 Ohm,
34 mm Voice Coil
8 Ohm
225 Watt Continuous
450 Watt Program
900 Watt Peak
75 – 15.000 Hz
60 – 18.000 Hz
96 dB / W / m
125.5 dB
65° x 65°
all components of the system are
set up and connected properly.
5
Fig. 1
Advertisement
Table of Contents
