Modifications On Slot 4 (Anybus-Cc Communication Modules); General Information; Accessories - WEG CFW-11 User Manual

2.3 Modifications on Slot 4 (Anybus-CC Communication Modules)

In order to ensure the proper connection of Anybus-CC communication accessory
in Slot 4, a support with guide rails was included in the product according to the
following picture.
Support with
guide rails

3 GENERAL INFORMATION

3.1 Accessories

New accessories were developed for CFW-11 inverter series, that correct (WEG part
number) and complement table 7.2 of user's manual as follows:
WEG Part
Name
Number
11008162 IOA-01
11008099 IOB-01
11008100 ENC-01
11008101 ENC-02
11008102 RS485-01
11008103 RS232-01
Figure 2.2: Anybus-CC accessory connection
Accessory models
Control accessories for installation in the Slots 1, 2 and 3
IOA module: 1 voltage/current analog input (14 bits);
2 digital inputs; 2 voltage/current analog outputs (14
bits); 2 open-collector digital outputs.
IOB module: 2 isolated analog inputs (voltage/current);
2 digital inputs; 2 isolated analog outputs (voltage/
current) (the programming of the outputs is identical
as in the standard CFW-11); 2 open-collector digital
outputs.
5 to 12 Vdc incremental encoder module, 100 kHz,
with an encoder signal repeater.
5 to 12 Vdc incremental encoder module, 100 kHz.
RS-485 serial communication module (Modbus).
RS-232C serial communication module (Modbus).
Addendum to the CFW-11 User's Manual
Description
- English -
Identification
Parameters
Slot
P0027 P0028
1 FD-- ----
1 FA-- ----
2 --C2 ----
2 --C2 ----
3 ---- CE--
3 ---- CC--
CFW-11 | 7