Charging Your Lithium Battery - Motocaddy S1 Instruction Manual

Charging your Lithium Battery

Charging your Lithium Battery
The Lithium battery can be left on the trolley or removed for charging. It is possible to charge the battery
while the trolley is folded or unfolded. If folded, the charging port will become automatically accessible
(fig. 1). If removing the battery for charging, slide the battery release catch to the left (fig. 2) and lift the
battery using the two grab handles provided (fig. 3). If the charging port is not visible - for example when
the trolley is unfolded or battery has been removed - it can be pulled out manually.
1. Plug the Motocaddy 28V Lithium battery charger into an earthed mains power socket
2. The charger light will be GREEN when not attached to a battery to indicate that it is ready to charge
3. Attach the charger cable to the charging port, matching the black and grey connections
4. The charger light will provide an indication of charging phase:
RED - Battery charging
5. The charging process will take between 3 to 5 hours depending on the depth of discharge.
This may take longer for the first few charges
6. Once charging is complete, disconnect the charger from the mains power supply and battery
7. The charging port will need to be pushed into the battery to switch the power on for next use
If you connect the battery to the charger and the light goes out, this is likely to indicate that the battery
is fully charged. Please double check the battery on the trolley to ensure that it is fully working. If the
light flashes RED and GREEN consecutively, this indicates there may be a fault with the charger.
Page 8
GREEN - Battery fully charged
Fig 1
Fig 2
Fig 3