Motocaddy S1 Instruction Manual page 19

Introduction to DHC / Using the DHC Parking Brake (DHC models only)
The below information is applicable to DHC models ONLY.
Introduction to DHC
The letters DHC stand for 'Downhill Control' and mean that your trolley will automatically maintain a
controlled speed whilst travelling down hills.
Whenever you are looking to move the trolley, even if just to reposition it ready to use, always put it
on a low speed setting to make it easier to steer.
Fig 1 - S1 DHC
Using the DHC Parking Brake
DHC models are fitted with an electronic parking brake. To use this feature, the trolley must be in a
stationary position. The parking brake is initiated by rotating the speed dial down to 1 and then
rotating one click further.
Once activated, the screen will toggle between 'P' and number '1' (fig. 1 & 2).
The speed setting can be adjusted whilst the parking brake is activated by turning the speed dial.
To release the parking brake, press the On/Off button to start the trolley.
Fig 2 - S1 DHC
Page 19