Starting, Stopping & Changing Speed - Motocaddy S1 Instruction Manual

Starting, Stopping & Changing Speed
Starting, Stopping & Changing Speed
The S1 is very simple to control. There is one main button
that is used to start and stop the trolley, whilst also
controlling the speed, which can be adjusted while the
trolley is stationary or in motion.
The trolley has 9 speed settings (1 to 9) with 1 being the
slowest and 9 the fastest. To increase the speed, rotate
the speed dial clockwise, or anti-clockwise to decrease
the speed.
To start the trolley, simply select your required speed
setting and press the button. The trolley will smoothly
accelerate until it reaches the selected speed. To stop the
trolley, simply press the button again - there is no need to
reduce the speed setting.
The speed number will start flashing when you press the
button. This indicates that the trolley has been started.
Page 16