Front Wheel Alignment - Motocaddy S1 Instruction Manual

Adjusting the Front Wheel Alignment
In the unlikely event that your trolley is not tracking in a straight line, the alignment of the front wheel can
be adjusted to rectify the fault. This problem can be caused by a number of factors including a slightly
loose bag support or an unevenly packed golf bag.
To alter the alignment of the front wheel, follow these simple steps:
1. Lift the quick release lever positioned on the front wheel housing and loosen the wheel nut (fig. 1)
2. There are two small metal dials on either side of the housing that are used to realign the wheel (fig. 2)
3. If your trolley is veering to the right, you will need to turn the left hand dial clockwise and the right
hand dial anti-clockwise
4. If your trolley is veering to the left, you will need to turn the right hand dial clockwise and the left hand
dial anti-clockwise
5. Tighten the wheel nut and push down the lever to lock the wheel back into place (fig. 3)
This procedure can be carried out until you are happy the trolley is moving in a straight line. You may only
need to adjust one dial at a time.
These instructions are based on positioning yourself in front of the trolley looking at the wheel.

Front Wheel Alignment

Fig 1
Fig 2
Fig 3
Page 11