Gateway 920 User Manual page 89

Gateway server user manual
Hide thumbs Also See for 920:
Table of Contents

Advertisement

Invalid partition table
The master boot record may be corrupt. For troubleshooting information,
see
"The master boot record is corrupted" on page
Invalid password
Enter your password again. Some passwords are case sensitive.
If you do not know the password, you may need to reinstall the software
you are trying to access.
Startup passwords are stored in BIOS. If this password has been set and
you do not know it, you may be able to bypass the password through
system board jumper settings. For more information, see
BIOS passwords" on page
Keyboard not detected
See
"The keyboard does not work" on page 94
Turn off the server, then check the keyboard cable.
Keyboard stuck key failure
Remove any objects that may be resting on the keyboard, then restart the
server.
Make sure that a key is not stuck. Clean the keyboard if necessary.
Memory errors were detected while the system started up
See
"Memory errors were detected during server start up" on page 95
a possible solution.
Memory size error
Open the BIOS Setup utility, then save the memory configuration.
Missing operating system
The master boot record may be corrupt. For troubleshooting information,
see
"The master boot record is corrupted" on page
Use FDISK to make sure that your hard drive has an active partition. On
FDISK's main menu, select the Set Active Partition option. In MS-DOS or
Windows 95, the only partition that can be set as active is the primary DOS
partition.
77.
www.gateway.com
Error messages
92.
"Bypassing the
for a possible solution.
92.
for
83

Advertisement

Table of Contents
loading

Table of Contents