Gateway 920 User Manual page 71

11
Install the memory, processor, and heat sink, then reconnect the heat sink
cooling fan to the system board.
12
Connect the power and data cables.
13
Install the expansion cards by following the instructions in
expansion cards" on page
14
Close the server case by following the instructions in
case" on page 44.
15
Turn on your server.
16
Press F2 when the Gateway logo screen appears during startup. The BIOS
Setup utility opens.
17
Check BIOS settings to make sure that they detect the server's new
hardware, then save your changes (if any) and close the BIOS Setup utility.
56.
www.gateway.com
Replacing the system board
"Installing PCI
"Closing the server
65